Forty stones,
filed by face.

A stone library for architects and makers. Scroll to follow the wire through the block, then spin the rack and pull out the slab you want to touch.

Carrara yard40 slabs on the rack3 finishes

Cut on the bench, not in a catalogue

01, the saw

Every slab on the rack starts as a block like this one. A braided steel wire, beaded with diamond, runs round the guide wheels and through the stone until the face falls away clean.

32m/s wire speed
11mm kerf
2.4m² an hour

One slab kept from every block

02, the library

Before a block leaves the yard, a 20 mm slab is cut from its best face and stood in the rack. When you order, you order the block you held, not a photograph of a cousin.

Then it goes on the rack

03, the index

Drag to spin it. Hover a slab and the raking light runs across its veins. Click one and it slides out to fill the screen, with its name, origin and finish.

Open the rack

The rack

40 slabs from 14 countries, each 1.5 by 1.9 metres. Filter by colour, hardness or finish and the rack reorders itself to put the matches in front.

Colour
Hardness
Takes a finish
Slabs in front40 / 40

Hold the stone before you spec it

Up to 3 samples, 100 by 100 mm, cut from the same blocks as the slabs on the rack. Posted from the yard within 5 working days.

  • Statuario Venato, Carrara, Tuscany
  • Nero Portoro, Portovenere, Liguria

← nightmarqueefootage: Higgsfield⧉ Copy this prompt